Ex Differential Pressure Transmitter 10MPa - IECEx ATEX Hazardous Area Zone 1,2

Pressure sensors can also be used to calculate the fluid level or height of fluid in the process tank. This technique is often used to measure the liquid level in storage tanks, such as water towers or sumps. For most practical applications, the liquid level is directly proportional to pressure. The pressure level sensor is an external or submersible pressure sensor, which is suitable for measuring the level of any fluid in a storage or process tank/reservoir.

To detect any leaks in the pipeline, there are many methods available, but we can also detect leaks in the pipeline through measuring the pressure. Pressure Reduction could point to pipe leakages. Fixed Pressure Transmitters mounted directly on the Pipeline at various intervals can pin-point the specific leakage point along any Pipe carrying any fluid/water.

In the process industry, pressure transmitters, especially differential pressure transmitters, are used to measure the flow of liquid or gas through pipelines. Measuring the pressure drop across the orifice plate installed in a pipe is the most commonly used flow measurement method. An orifice plate is just a plate with a hole of a known size in the center. When liquid or gas passes through the orifice, a pressure drop will occur from upstream to downstream on the orifice plate. This pressure drop is proportional to the flow rate (flow rate proportional to the square root of Delta P), allowing the transmitter to calculate the flow rate in the processing pipeline in real-time.